Biao Bang Aircon Cleaner B-2291 (500ml)

Safety Precaution:
Start the vehicle engine and ensure the vehicle is parked on a flat surface with all doors and windows closed.

Remove the air conditioning filter. The air conditioning filter is usually located under the vehicle engine hood and can be determined by referring to the vehicle manual or consulting the vehicle manufacturer.

Start the vehicle engine, open the windows, and set the air conditioning to the maximum fan speed but only turn on the fan mode.

Turn on the outside air circulation mode to ensure external air flows into the vehicle.

Find the location of the outside air intake. The outside air intake is usually located under the vehicle engine hood or at the front of the vehicle. The specific location can be determined by referring to the vehicle manual or consulting the vehicle manufacturer.

Prepare the cleaning product and connect the hose. Connect the hose of the cleaning product to the nozzle and ensure the hose is securely fixed to prevent the nozzle from falling off.

Inject foam into the nozzle and start cleaning. Press the switch and rotate the nozzle to the right until the foam is completely sprayed out. Before removing the hose, rotate the nozzle to the left to avoid the foam from flowing out.

Let the fan run for about 15 minutes. During this time, the foam will clean the dust and dirt in the air conditioning system.

Turn off the air conditioning and engine. After cleaning, turn off the air conditioning and engine and wait for about 10 minutes for waste liquid to flow out. The waste liquid will be discharged from the vehicle drainage outlet.

Product Key Features:
- Deeply cleans and eliminates bacteria and dirt.

- Deodorizes and freshens the air.

- Prevents bacterial and mould growth.

- Easy to use, simply spray onto filters or vents.

- Improves air quality for a more comfortable and healthy driving experience.

How To Use:
1) Shake well before use as the spray is foamy and not easy to flow.

2) Spray evenly onto the dirty surface from a distance of approximately 20cm.

3) Allow the foam to sit on the surface for 30-40 seconds.

4) For heavy dirt, use a small brush to scrub the surface gently.

5) Wipe the surface with a dry cloth after cleaning.